AgTalk Home
AgTalk Home
Search Forums | Classifieds (97) | Skins | Language
You are logged in as a guest. ( logon | register )

John deere moldboard plow .
View previous thread :: View next thread
   Forums List -> Machinery TalkMessage format
 
4th GenerationFarmer
Posted 12/15/2022 08:03 (#9984220 - in reply to #9984147)
Subject: RE: John deere moldboard plow .


NWC Ohio
You don’t give any pertinent details of the plow itself to help you a lot.

If the plow has an on-land hitch, than most likely you can plow with both duals on. An on-land hitch plow will have a transport wheel in front of the front plow bottom to run in the previous plow furrow. If your plow does not have this transport wheel, and the depth of the front of the plow is controlled by your 3 point hitch setting, than you will have to pull the right dual off, and your right side front and rear tractor tires will run in the previous plow furrow.

Even though your going to work your ground 2x after plowing, do a good level job of plowing now! If you don’t it just makes the ride and leveling up of the field so much harder behind a poor plow job.
Top of the page Bottom of the page


Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

(Delete cookies)