|
NE CO | For any 30 series need to get a software part upgrade then have your dealer update and few controllers.
---
30 series and MY10 8R/T
8030 Series, 9030 Series, MY 10 8R (S.N. 101-41000), MY 10 8RT (S.N. 900101-905300)
NOTE: On these tractors, once the software order is applied to the machine, the software configuration persists even through a service part replacement of all controllers (the configuration is saved in Custom Performance, in addition to the machine controller).
NOTE: There are not instructions in the manuals for installing the activation on these machines.
Order RE345354 software for the machine using normal parts ordering process.
Note: If software is ordered machine down the software order will be processed immediately. If the software is ordered as a stock order it will process at 2:00 PM local time.
Download and install the payloads for ACU, CLC, and SSU (SST).
Note: The software assembly numbers assigned to the machine may remain the same after the software order is applied to the machine. It is still necessary to complete the software download and install to make the necessary changes to the machine. The word “NEW” may not show up even after the order has been completed. It is still needed to update the software.
The activation is complete after all of the software assemblies are installed.
Cold boot the display. | |
|