|
Southeast MN | This "A" model series is an example of where Case should have picked new numbers.
I have a 2021 75A and it is spec'd a little nicer than the base 75A. While made in Turkey, it does have the power shuttle and 12 speed gear option like the 75C. This vintage of 75A uses a 3 cylinder engine vs the 4 cylinder used forever in the 75C; should also note the specs from Case list the 75A has a little better 3pt lift capacity than the 75C.
The cab is slightly wider in the C, as well as the dash is nicer/different than the A. I went with the 75A because it was in stock and 'old' pricing vs ordering a 75C and spending quite a bit more.
After putting 16x hours on this thing for yard duty, light loader work, pulling bale wagons and the rake it has done well and I think of it as a modern IH560 (roughly 60pto hp). Biggest complaint is the cooling fan noise is LOUD as it just screams at high engine rpm. Also, only one of the two hydraulic remotes has a float position, but salesman pointed that out to me on the demo.
Overall, it's a handy tractor and I would buy it again.
If the budget allows, the MF 4707 is a strong competitor to consider. At the time, the MF price was quite a bit more than this Case.
 (E8DCC630-5F08-41E2-8F93-0F13164597DE (full).jpeg)
Attachments
----------------
 E8DCC630-5F08-41E2-8F93-0F13164597DE (full).jpeg (121KB - 179 downloads)
| |
|
CNH Farmall 75A or 75C
