|
| Thanks for the long descriptive paragraph above. That was a great explanation and easy to follow. I have another question on using a Raven 440 for NH3 appl. I've been using the COOP's bar for the last 7 years and they have dickey john controllers. There is a setting that I changed everytime I got a fresh tank with a different pressure. That was for product density variation. Now we bought our own appl. bar with a raven rate controller and flow meter and pulled out the old 440 monitor from the closet (Dad used it in the 80s and 90s).
My question: is there a setting that needs to be changed for density on a Raven 440, and if so, where can that setting be changed? Is there a table with tank psi and product density like I had for the dickey john settup?
Thank you | |
|
Raven SCS 440 Monitor and NH3
