|
SE Michigan | I made my own set last year for just that purpose. They work OK, but the biggest problem is you cannot see where they are at in relation to where you want them to be. I was using them to move brush with my Backhoe, they worked great until I bent them both like pretzels.
Plus, pick up anything heavy puts allot of stress on the loakder because the load is soo far away from teh loader / tractor.
Since then I bought a bigger skid steer and a set of quick attach forks. Currently the best thig I ever bought.
Look into getting a standard quick attach plate for your loader so you can use any universal skid steer bucket, fork or other attachment. I gave $500 for a new set of forks, buckets can be found for$400-600 depending on the size. check on Ebay, seen a few universal conversion plates ther for not too much $$ | |
|