|
Coles County, Illinois | If that trans pressure light is the same as what my 4640 had the sensor provides a path to ground for the light. If you don't have enough pressure the sensor switch closes, the light now has a ground and lights up. On my 4640 I (carefully) unplugged the sensor and the light stayed on. That told me the wire between the light and the sensor was grounded. I found the bare spot and some black tape fixed the light on issue.
P.S. Z930R is in the lead of the 6 I looked at today.
Edited by Herbie56 7/26/2022 23:03
| |
|
Need help with John Deere 50 series tractor Investigator II Monitor
