|
| Does anyone have experience using an FMIS system (SMS, QGIS, etc) to change a drones .KML flight map (just shows lines where the drone flew) into an actual as applied layer that will show coverage across the whole field?
- Didn't know if there is software where you can increase the lines to the width of the drones pass (28' in this case), add a product and rate, and possibly clean up some of the extra flight path that is just from the Drone taking off and returning home.
Edited by bigmuddyhunts1 7/20/2022 09:26
 (Screen Shot 2022-07-19 at 9.27.54 AM (full).png)
Attachments
----------------
 Screen Shot 2022-07-19 at 9.27.54 AM (full).png (80KB - 461 downloads)
| |
|
KML Flight Path into As Applied Shapefile
