|
| Thank you for the input guys. Did some more looking and no ECM power is dropping when I have my issue. Decided to check one more thing and found the switched input (pin 3 in the diagram provided) is only seeing about 5.3v. Judging from what I see here in diagrams that input should see battery voltage, correct? I wonder if this may be my issue. Since it is well below the 6.2v the diagram notes. Was going to jump power to that terminal but wanted to be absolutely sure if the switched power that needs to be seen at pin 3 on the ECM is supposed to be battery voltage. Seems to me it should be. Was going to try and jump 12v to that pin and see if my problem goes away. | |
|
Versatile 435 fault issue
