|
missouri | Was planting with my 6480 massey (2008 tier 3 perkins) dyna 6 transmission and went to back up and it wouldnt move, fiddled around with it and got codes T 110 and T109 one of which is forward solonoid open circuit and the other is reverse solonoid open circuit. checked all wires related and glanced at wiring harness up to back of cab but i could inspect better but after tractor set for an hour it would move again. if you shuttle it back and forth not using the clutch it usually does not kick out but still will occasionaly kick out but if you use the clutch about every other time it kicks out and flashes the gear indicator and gives the codes again. I can ohm test the solonoids but i cant think both would be going bad at same time its never done any of this before. Any ideas of things to check thanks in advance. | |
|
Massey Ferguson 6480 transmission codes
