NW KS/ SC ID | Shimmy1 - 4/17/2022 11:52
Snap binders needed to be outlawed as soon as rachet binders were invented. If you tie a load PROPERLY, and check it WHEN YOU SHOULD, once it's tight, it's tight. Stupid "boomers", improperly hooked chains, improper chain-equipment hook points, chain sizes, and improper number of tiedowns will all lead to problems, not the wrong "hook" on the end of the chain.
I get along fine with lever binders. They need to be good ones like Lebus though. Chinese one don't over center properly and pop open easy. |
Tie-down chains to D-rings?
