|
Northern CA | Any suggestions for chaining / tying down sprayer (Spra-Coupe 4460 and GVM size) multiple times a day? I have two sprayers that are transported on two different sprayer / cradle style trailers. Some days I might be off and on the trailer close to 10 times. Even though most trips are very short, accidents can happen on short trips with wide loads. I made a bracket to raise and lower the ramps with an electric winch. I am tired of reaching up to fasten and then use a binder to tighten the chain. Electric winches on the four corners would be the concept, but would like to be DOT legal. I found one supplier of air operated winch strap ratchets, but those were about $2,100 each, and sold only out of Austrailia. That is too much considering I need 8 I think. Any suggestions? Thanks.
(DD63963E-9ECC-4FFC-BF67-83480DDC9112 (full).jpeg)
Attachments ---------------- DD63963E-9ECC-4FFC-BF67-83480DDC9112 (full).jpeg (123KB - 27 downloads)
| |
|