Near Intersection of I-35 & I-90 Southern Mn. | Not the same problem but I use an 8310R on the planter. It has 5 SCV's. It is ground drive. Originally I used SCV 1 for the frame (1770NT), SCV 2 for the rarely used markers, SCV3 for the left Vac fan, SCV 4 for the right Vac fan and SCV 5 for a hydraulic spray pump. I noticed that the spray pump was pulsing which was evident by a change in the pressure gauge and obvious pulsing of the output spray hose from the pump.
I switched things around and now run the spray pump off of SCV 2 and the markers off of SCV 5. The pump runs smoothly now. Tech says something must be wrong with SCV 5 but it works acceptably for the rare use of the markers so I haven't looked into repairing it. I have no use for SCV 5 other than with the planter.
My problem seems to be limited to SCV 5 where yours is more general. Good Luck. |
John Deere R series scv
