|
mora | is there a trick to getting the little bugger out from under the shield? i have all the lines loose. the bracket loose from the motor, and off the dowel pins. i developed a leak on the pump while running the auger this fall. it was not the shaft seal. it was coming from the top, and running down the shaft side. it wasnt the oring fitting on top either. dont know if it is a piston plug or what. it probably need to be refreshed after nearly 40 yrs of service. any mods or suggestions to improve performance? i still use it as a planter and haying tractor.
kevin | |
|
4320 hyd pump ?
