|
rrv, nd | i have a 9600 with 630. it was a bull dozer in position 1, would work sometimes in good conditions in position 2. pretty much used pos. 3. was not happy with it in the mud this fall. If you read book very carefully it will explain what to do, but not very well. I backed combine in shop on level cement, and started adjusting the L rod on left end of header. it needs to be shortened, keep adjusting until in position 1 the headed will lift when put all the way to ground. keep adjusting until you are happy with it. I had to take off the L rod and adjust both ends, turn the ends on further. now i can run in position 1. | |
|