|
| To the right of the CommandCenter screen, there should be a shortcut button that looks like a gear. If you touch that, it should take you to transmission settings in the screen. I can't recall what the various modes are on a 6030 series, but there should be several auto modes that vary in the amount of engine droop they allow before changing the gear ratio to compensate (e.g. - road transport mode allows more droop, tillage mode allows less). All modes will operate in auto just fine driving in the yard. As long as you are not in manual mode, the computer will allow the engine to run as low as 1200 RPMs with the throttle wide open. | |
|