|
NNW Nebraska | Don't think you will have any problems running the seeder.
I have ran a vemeer twin rake and a hydraulic drive sprayer pump with mine
You may need a flow divider valve to bypass oil that the Gandy doesn't use.
Running 2 things may be another story.
I believe the vemeer rake has a flow divider that bypasses oil more than the rake uses. The sprayer pump has a set screw that can be backed out to bypass extra oil.
1086 came with a 12 gpm pump. It could have been replaced with a 15 gpm pump. If you can figure out how to do it, you can add a powersteerig pump to the back of the hydraulic psi to gain a few gpm.
No idea if the bypass off a flow control for the seeder would run the
Cultivator.
Don't think you would want a newer closed center 1086. Heard they can be a money pit and a pain in the butt.
If you add a pto pump, Most likely that will be a open center pump so have to have exactly the right size pump or a flow control valve on that as well.
Will the cultivator work on open center? If so will it take the full flow, with a flow divider after it , to run the seeder?
Edited by Nebraska Sandhiller 1/10/2022 20:24
| |
|
1086 International Hydraulics
