If your worried about the drawbar you can order a drawbar support that was designed for the standard 750 drill (without dolly wheel or 2 point hitch). That ought to give you some additional support. Parts catalog showed a couple different ones.

As far as a 3rd outlet, yes original would be the neatest way but would likely be rather costly to add. You can add a electric over hydraulic multiplier that plugs in to 1 remote and allows you to switch back and forth to control 2 functions.

http://www.shoupparts.com/Catalog/View.cfm?type=Product&ShoupID=700-1594

(support.gif)

support.gif (14KB - 57 downloads)