|
| New to this tractor. 2004 CaseIH STX450 Quad with auto steer valve and CaseIH FM750. Pulling a 14ft ripper so this shows up more than on a larger implement. Once engaged the tractor will stay on the line but will slightly wander back and forth. This causes the ripper to move from side to side. Seemed to work ok first 5 rounds in the field and got worse as I went on. Dealer is too busy to get to me. Wondering if anyone knows something that I can change or set differently? Thanks to anyone who can help. | |
|
CaseIH STX450 Quad Auto Steer worms back and forth
