|
Bow City, AB, Canada | One thing to watch is that you put the variator pulleys back in the same way they came out. Set screws out the front of the blocks and the spring on the outside, as I recall without looking. Back when we were learning all about worn pullies, junk westward belts etc, we did that. It really ate belts then. Did it enough times that it only took about 25 minutes to change. Not the most convienient problem to have especially when the belt flies off going down the road in between turnouts.
Edited by combinejunkie 11/8/2009 22:54
| |
|
860 Massey land drive belts replacement
