|
Mount Vernon, WA | What makes you think you need a cooler in the first place, don't you think the tractor's cooler is adequate? If your application is properly designed, the system should be operating at high enough efficiency levels such that an additional cooler would not be required.
For example, a big generator of heat would be trying to shove 25 GPM to a motor that only needs half of that, and dumping the rest of the oil to sump. However, if you only send the motor the exact volume it needs, and if that motor is in good condition (i.e. high efficiency), then the heat generation should be almost nil. | |
|
Hydraulic oil coolers
