|
| Does it set the metal detector off with the pickup off? Could be a bolt loose in side of bottom roller,a bearing away or maybe a bolt in bottom roller or wear strip on it that is very slightly magnetic,have the wear strips just been replaced? Possibly the magnetic coil inside is bad also, If you hit the bottom roller with a 6x2 with feedrollers stopped does the metal detector go off? Also check the sensor with 2 spade lugs above and behind the hydraulic reverser motor by the upper driveshaft these can come loose and it wont reset hope this is of some help. | |
|
Claas Jaguar 900 "NEED HELP QUICK!"
