Posted 5/29/2021 09:51 (#9031370 - in reply to #9030991) Subject: RE: Vibrating roller almost done thanks NAT
Sac & Story county IA
Those bearings are not odd size. That is from way back when shafts were not accurate and the machinist had to take 1/16 off to get a consistent size. The world started ordering 1/16 undersize bearings. That became the standard. 1 7/16, 1 11/6, 1 15/16, 2 7/16, 2 15/16.
Vibrating roller almost done thanks NAT
