|
Edge of RRV MN | I believe we had d panel installed on a Quonset. Metal Sales is the manufacturer that made the tin we used it was ordered through a local lumber yard. I think the screws cost almost as much as the tin as in order for the warranty to be valid there was a special pattern the screws had to be placed. Lumber yard measured the building and the curve and placed the order so tin was cut perfectly to length. We had shingles removed but I know others that have left the old shingles on. Both cases striping the roof with 1 or 2x4’s is standard here. If you have a sag anywhere, the sag can be shimmed out with the striping. | |
|