|
Jeffersonville, OH | I will say that I can appreciate taking the time to build something to replace older controllers, but not everything is as simple as that. It may be fine for some folks, but others don't have the right "mindset" for parts that don't work 100% the same or better than the originals. From reading your description, it doesn't sound like your "controller" has any shift modulation at all? That will shift like a race car, so if you think your 6-7 shift is rough now, this will make it pretty much brutal. I won't say shift modulation is necessary for the transmissions life and parts, but most operators will not like a controller without any modulation to help smooth the shifts a bit.
I will add though, Versatile used the Twin Disc in many tractors up until about 2010 or so. They offer a "replacement" controller, and while it is not cheap, it is an option that to me is better than rigging up some junk rotary switches and throwing full voltage to your clutches when you shift. Is it worth it for a 4994, probably not for most folks, but for a 435 Versatile that failed a controller, it could be well worth it.
Chris
| |
|
For Case 4994 owners, "Twin Disc" transmission controller solutions
