Somerville, Indiana | kipps - 3/6/2021 10:01
I replied earlier to this thread, saying I've spent less than two minutes on a ISO machine. I use H pattern exclusively. I've got a couple questions about how ISO controls the wheel speed and direction.
If you push the "wheel" stick all the way to the left, without moving it fore or aft, what happens?
If you push the "wheel" stick all the way forward and left, what happens?
1.Some will counter rotate
2.The right side goes forward, left is still, so turns to the left |
Skid steer controls, from levers and pedals to ISO or H pattern
