|
| I'm 38, been running Bobcats for 20 years with foot controls. My new job bought a brand new T770 with ISO or H pattern, I started on ISO, it was tough, went to H pattern for about 30 minutes...... back to ISO and I'll never go back to H or foot controls. I could never get used to pushing both hands forward and twisting my wrists while in H pattern. I'm the type that pushes snow, moves dirt, scooped rock all while moving. If you stab a dirt pile, stop, roll bucket, lift, then back out, H pattern will work for you. But if your speedy and efficient, ISO is much easier to adapt to.
It helps that I've ran a pay loader with the right hand joystick, identical to the bobcat ISO pattern.
Edited by Brahamfiremen 3/5/2021 22:01
| |
|
- Skid steer controls, from levers and pedals to ISO or H pattern - Trent2520 : 3/5/2021 21:24
- RE: Skid steer controls, from levers and pedals to ISO or H pattern - Gearclash : 3/5/2021 21:48
- RE: Skid steer controls, from levers and pedals to ISO or H pattern - Brahamfiremen : 3/5/2021 21:57
- RE: Skid steer controls, from levers and pedals to ISO or H pattern - yellowfever : 3/5/2021 22:06
- RE: Skid steer controls, from levers and pedals to ISO or H pattern - MW farms : 3/5/2021 22:09
- RE: Skid steer controls, from levers and pedals to ISO or H pattern - SuperBoll : 3/5/2021 22:21
- RE: Skid steer controls, from levers and pedals to ISO or H pattern - HFR : 3/5/2021 22:54
- RE: Skid steer controls, from levers and pedals to ISO or H pattern - Kooiker : 3/5/2021 22:56
- RE: Skid steer controls, from levers and pedals to ISO or H pattern - snappingroll : 3/5/2021 23:07
- RE: Skid steer controls, from levers and pedals to ISO or H pattern - wrathchild : 3/6/2021 06:37
- RE: Skid steer controls, from levers and pedals to ISO or H pattern - Trint : 3/6/2021 06:41
- RE: Skid steer controls, from levers and pedals to ISO or H pattern - johnny skeptical : 3/6/2021 07:26
- RE: Skid steer controls, from levers and pedals to ISO or H pattern - Dockman : 3/6/2021 07:27
- RE: Skid steer controls, from levers and pedals to ISO or H pattern - Hoosierheartland : 3/6/2021 07:44
- RE: Skid steer controls, from levers and pedals to ISO or H pattern - dmax2001 : 3/6/2021 08:01
- RE: Skid steer controls, from levers and pedals to ISO or H pattern - N.of nowhere : 3/6/2021 09:09
- RE: Skid steer controls, from levers and pedals to ISO or H pattern - 801486 : 3/6/2021 09:56
- RE: Skid steer controls, from levers and pedals to ISO or H pattern - kipps : 3/6/2021 10:01
- RE: Skid steer controls, from levers and pedals to ISO or H pattern - Womp : 3/6/2021 10:04
- RE: Skid steer controls, from levers and pedals to ISO or H pattern - Vorderstrasse : 3/6/2021 10:16
- RE: Skid steer controls, from levers and pedals to ISO or H pattern - Bdairy : 3/6/2021 12:00
- RE: Skid steer controls, from levers and pedals to ISO or H pattern - Lone Wolf Picker : 3/6/2021 14:00
- RE: Skid steer controls, from levers and pedals to ISO or H pattern - nhermanson : 3/6/2021 16:14
|
Skid steer controls, from levers and pedals to ISO or H pattern
