|
SWMN | The cable drive electric clutch system is a little more work and components at the row unit. You mount the cable drive on the hex shaft like a Tru-Count would. But the meter drive is a different splined shaft to mate up with the electric clutch so you'll need a different meter. You'll need different harnessing and modules on the bar and a harness for each row to control the clutch and connect to the seed tube. You'll also need new seed tube sensors with the 3-pin weatherpack to match that row harness. If you can find this system complete it will all plug into your existing ECU stack. | |
|
Replacing trimble air clutches with electric on case planter
