|
McCanna, ND | Virtual terminal is the display that you look at/use.
Can bus is a electrical system that is based of 5 volts, can low is always the green wire (grass/ground/low) and can high is always yellow (sun/up/high) and they will add up to equal 5 volts, so might have 1.3/3.7 voltage reading for example to get to 5 volts.
ISO bus is the technology (software) they use to make everything work I believe and is a standard. Ag equipment operates off one standard, trucks operate off another standard, etc. When you have a ISO piece of equipment you should be able to plug it into any ISO VT/Monitor and it will work.
However some MFGs (all?) use proprietary software so they don’t play nice and have all the features when ran as ISO. For example on a older deere planter you can split screen with a 2600/2630 display to see planter info and your coloring map/field info. That is proprietary software that will not work with a ISO implement, only works on deere equipment. | |
|
ISOBUS - CANBUS (explanation for dummy’s)
