Near Intersection of I-35 & I-90 Southern Mn. | This agrees with the pinouts I used for the Trimble 750 in my post above.
The lower drawing is what Trimble calls a Port Replicator. I think of this as a Tee that is inserted in between the display and the cable that you had previously plugged into a port. This Port Replicator "replicates" the port BUT allows the radar to be branched off for another device. You would use this if you need the port for something like steering but still want to get the radar out for something else such as a planter monitor, spray controller etc.
The chart seems to show using Pin 11 for a remote coverage switch like my notes. The pinouts for the video don't seem to agree with my notes but I seem to remember that there was some confusion in the drawings I used for a reference for that. |
Trimble radar output cable pinout
