|
| Hi Chris
Wanted to give you an update and some more information.
Our local AGCO service department was out today and got the tractor to move. He thought it was the seat switch.
I came home from work and could not get it to move again so here is how I got it to move and act.
Turn the key and let it cycle. Start the tractor and put the shuttle in forward right away before letting out the clutch and it would roll. If I waited it would fault out right away I had to be quick. As long as I didn't put the shuttle back into neutral it would keep moving. As soon as I put it back into neutral the orange flashing light would come on and movement was stopped.
Also once I got the tractor backed into the shed I left my foot on the clutch and could get the shuttle lever to go green and red for forward and backwards and could put the shuttle in neutral and everything would work. As soon as I let my foot off the clutch the warning light would come back on.
AGCO service rep says there was no error codes saved in the tractor but the ER on the dot matrix display did display 00.00.48.
I called the service rep back and he was going to talk to the mechanic and see what they thought as they don't think it could be the seat switch.
Any help would be great | |
|
Massey 5711 SL
