Jeffersonville, OH | white6810 - 12/14/2020 14:13
Thanks for the reply Chris.
There are no visible error codes on the dash. Just the orangel flashing exclamation mark.
There was a code 00.00.48 when I was going through the screens but not sure if that was a code or not
We have taken all the plastic covers off and everything seems to be fine with the switch itself.
Tractor got delivered last night and we finally we able to get it off the trailer then stopped again.
I got it to drive around the yard last night for a few minutes before it stopped again with the orange light in the dash coming back on.
Truck driver said he had no issues loading it in the morning and days earlier when we picked up. Dealership says they never had it act up either.
This tractor was pre wired and setup for a loader but never had it installed. Could the joystick controller be the problem? I know I am just grasping at straws.
I will try being more aggressive with the pedal when I get back to the farm.
Gotta be an electrical issue somewhere.
Our 6475 has a similar setup just not as many electronics.
Not likely the joystick parts.
00.00.48 is a switch error in the power shuttle lever. Probably will need a lever. Without the EDT, I don't think there is any way to diagnose it on the little tractor.
You might try holding the clutch down, Power shuttle in Neutral, and hitting the Forward/Reverse button on the loader joystick. If it beels, and light up the forward or reverse light on the dash, you can use that button the shuttle FWD/REV to at least move it.
Chris |
Massey 5711 SL
