Viewing a thread - Put flat storage in a barn

You are logged in as a guest. ( logon | register )

Put flat storage in a barn	View previous thread :: View next thread
Forums List -> Machinery Talk	Message format

roush9799

Posted 11/22/2020 12:45 (#8616154 - in reply to #8615712)
Subject: RE: Put flat storage in a barn

West Central IL

I wish we had an unload like that in ours. We set an auger the end of it with a 12' pigtail of flighting on the end of it with a handle on the other end to move it around and hold it in place. Then we use the skidsteer to clean out the corners and such. We can only move back in the barn so far with the auger and still reach the trucks outside the doorway. Have to pack or push the rest up with the skid steer. Back when we used tandems we could back them in the barn at an angle and get the auger all the way to the back, but we didn't have a skidsteer then either, had to shovel and broom it all out. We have a similar setup for fans, put a row down the middle and a couple in the corners. Also put a couple tubes with no fan to help draw the air on through and out, and we can put a fan on them if needed if we get a hotspot. We fill the sidewalls up about 5', but they are braced.

Edited by roush9799 11/22/2020 12:50