|
| Hi Von, I need to change my cylinder drive belt, so I must remove the variable speed drive belt to get it off. I only have a book for a Titan 1 machine, but have a late 6620 Sidehill. The titan 1 book shows removing the top sheave to do this, but it's lower brackets are different and would allow that. It seems the lower sheave should be similar to remove as the titan 1. To get the outer half off, it talks about a suitable puller, leaving the machined bolt in place but loose. Can you tell me the procedure to pull this when you have a chance? | |
|
JD 6620 Cylinder Drives Alignment
