|
| You might check the following. IF this is it your dealer didn't look very hard:
Symptom :
Reel raises and/or lowers too fast
Resolution :
Ensure that the orifice is in place in the multi-coupler
[ Hide ]
There is an orifice built into the fitting (part number 86623107) on the bottom of the multi-coupler. The fitting is in the middle of the coupler on port C. Inside the fitting there should be a drilled hole 1.5 mm in diameter. This adapter fitting with orifice is what controls the speed of the reel raise.
| |
|
7010+2020 reel problems
