|
Jeffersonville, OH | rancherman - 10/25/2020 13:48
Yes, seems good now. not sure why the manual scv's are not working though.. Haven't tried the joystick ones though..
a couple weeks ago, it showed the tlph warning on a cold morning warm start up with similar results.. no movement. Lasted only for a minute or so though.
Called the shop manager guy and he only said to shut it off, and let the computer restart.
So, it either warmed up enough in the meantime to start working, or the 'reboot' thing. It's very possible it's part me not doing something correctly..
Here's what I always tell folks new to Electronic tractors...especially when the weather is turning cold.
If you have codes or problems at startup, give it 5-10 minutes to warm up, shut it down and give it 2-3minutes to "forget what it was doing" and then try again. I'll say 95% of the time, the problem is gone. Cold starts can make a battery just a little weaker, and make one computer or component start a bit later than it should, and cease glitches.
As far as the manual SCV's, they should work, the beauty of them being manual. Unless the cable breaks, or there is a problem with the hydraulic system, it will work.
Chris | |
|
!TLPH! on MF 6616 screen..
