As Bobby said you should have the port to install the power beyond. Fortunately for you, you have a White and not a John Deere.

To install a Power Beyond on a 4440 or such tractor cost a couple hundred dollars and involves some work.

 To install a Power Beyond on a White takes a few fitting and a couple short pieces of hose and you're in business.

There is pressurized oil available where the RED circle in the first picture is. There should be a plug in the top of the end cap, remove plug and install hose to get your oil supply.

Return the oil to where I have the BLUE circle in the second pic. There should be a plug there, remove plug and install a hose to return the oil back to the reservoir.

There are a few Whites out in circulation that are missing the hole and plug that is circled in BLUE, if you are missing this plug all hope is not lost just ask Bobby how to go about installing one.  Bobby and a neighbor of ours are just lucky enough to have the only 2 Whites known to have left Charles City without this plug in it.

We use the Power Beyond for the fan on a White planter and also for a hyd drive spray pump on our sprayer.

Using a male coupler on the return makes it impossible to hook the hoses up backwards, which would damage both the planter fan or the sprayer pump.

(2-105 hyd port res.jpg)

(2-105 rearend rs.jpg)

2-105 hyd port res.jpg (112KB - 631 downloads)

2-105 rearend rs.jpg (114KB - 648 downloads)