|
Hannibal, MO | There’s is 2 different methods to fix your feeder house. Agco has a way that requires cutting the square tube and some other stuff loose. Then Dan’s way to just cut the floor loose and move it down. I recommend dans way. While your at it move your rear feeder chain drive so the rock trap works. S9 don’t need this done as it has been fixed so I hear. On the rotor add the Agco sweeps to the thrashing end. On our bean machine we add 3 more across the separation end of the rotor. We also bolt an f2 rasp bar or 2 to the rotor cage to help with rotor loss. We had an R76 that would blow away an s88 in beans until we did this. In corn we remove the 3 sweeps from separate side of the rotor and remove the 2 cover plates on cage. The cascading pan on 2015 and newer helps in wet corn for capacity. | |
|
S9 Gleaner
