|
West Central Iowa | I just re-read you original post and now I am second guessing myself. For some reason I took you original post to mean that you were running a hydraulic DRIVEN hay rake, that would use a hydraulic motor to run the basket. If that is not the case, and the only hydraulics being used are a lift cylinder, then disregard my posts pertaining to hydraulic motors.
If it is just the lift cylinder, then I am thinking something is messed up with the way the clutch is put together or the way it is adjusted.
I still don't like to see those manual by-pass valves opened because all too often they are forgot about and left open and it will cause accelerated clutch wear.
Sorry for the confusion. | |
|
JD 4430 burning up clutches
