Diesel nut - 5/28/2020 09:00 Hope it helps you guys, the yoke was what I found was my noise maker. Yoke was $250 and $50 for the retainer plate, new o-ring and there are 3 different sizes of shims. The tech told me his book said for the shims to use/ adjust as needed. I got all 3 sizes their a $1.50 each but I put all the 4 original ones back in and it was tight So I keep The new shims in case I need to take a thicker one out and add a skinner one later in life. I’m sure everything on my tractor is original bought from original 1 owner and it has like ur hours just hit 3250hrs