|
southern nebraska | Sounds to me that your hitch sensor has failed. You should be able to put a jumper between b and c and it should go up and unplug it should go down, I am sure you have but check for voltage there. That is a good diagram that most mechanics should be able to follow without problems. Draft sensors take a beating along with the wires. Double check wires and we had lots of connection issues with ours so check those out as well.
Hope for the best, let us know what you find. Those tractors are getting hard to get parts for. | |
|
96 AGCO Allis 9675 Three Point Hitch Issues
