Three point hitch won't raise or lower from the cab.


I could get it to raise and lower from the rear switches with the hitch position sensor unplugged.  When the hitch position sensor is connected it will only lower.

I am getting the following error messages.  1-4 and 2-4 flashes all of the time.  2-6 flashes when the depth control lever is pulled back.  When it's forward, the error goes away.

We have checked all of the signals coming from the sensors and they seem correct.

The electronic lift control module has probably failed but hoping it's something else.

Pictures attached.

Thanks,

Jay

(20200504_114720373_iOS (full).jpg)

(20200504_114740759_iOS (full).jpg)

20200504_114720373_iOS (full).jpg (187KB - 46 downloads)

20200504_114740759_iOS (full).jpg (222KB - 77 downloads)