|
Somerville, Indiana | That's good ad vice...Be sure to use the fork lift or loader, do not
depend on the wire rope at all, you are past the design of the auger
transport system when you go lower..
When you go back with the transport stop, raise with the fork lift or
loader, not with the wire rope auger winch...You have went over center
when you lowered the transport stop..
Not a good idea to lower to transport stop if there are other ways to
get around it, all is in much more strain that is not designed in the auger
transport system including the wire rope (cable) and winch.. | |
|
Any reason I can’t move this stop on a Hutchinson 13” 102’ Auger
