|
| To bleed those master cylinders you have to lower it a little and then loosen the hose clamps around the cylinder ram spacers on the front of the ram and remove the spacers. This allows the cylinder to travel farther and when it gets to the end of the stroke it goes past the bleed ports and then oil from the tractor can go to the wheel cylinders. When running with the spacers in place the oil to the wheel cylinders is trapped oil making them slave cylinders. Also when you loosen the bleeders the only way to replenish that lost oil is same as above, its best to keep the remote raising while bleeding. | |
|
7200 planter wont raise (12 row)
