|
Clifton Kansas | We had sensor 1 make a harness to go from the 3 sensor harnesses that plugs into dickey john modules to the 37 pin for a 24 row (6,12,6) to do the same thing you want to do.
It worked good.
So they should be able to make one up for a 2 module system. I can't remember if I had to tell them what pins to make for each of the 6 connectors.
You might check with Sensor 1 to see if they could make one for you.
I could look at the 12 row adapter for you and thy and figure out what goes where if need. | |
|
Dickey John seed tube module pin out help
