|
northeast ohio | I converted our 12 row a couple of years ago from a DJ harness to FieldIQ. Don’t have any photos handy right now to be sure the module is the same as yours. FieldIQ has a round 37 pin plug for up to 24 rows. I found a used precision planting adapter and cut the male end off and pinned female (socket) end to two 12 pin Deutsch plugs which paired to the ones that go from the row harness into the DJ module.
What I can’t remember without looking at the planter is if all 12 rows were on one plug and only power and ground on the other or if they were mixed with power and ground split. Will try to get photos tomorrow.
Edit - here are photos. On a 12 row all of the rows are on one Deutsch plug and then power and ground on a second.
Edited by neo_ag 3/17/2020 18:09
 (BA49D037-29CE-4A14-BD42-1F7CFDA942DF (full).jpeg)
 (80779846-D708-4D25-800C-320A47F08E33 (full).jpeg)
 (467FB13F-FCAB-47DE-A76B-FA204F686209 (full).jpeg)
Attachments
----------------
 BA49D037-29CE-4A14-BD42-1F7CFDA942DF (full).jpeg (186KB - 87 downloads)
80779846-D708-4D25-800C-320A47F08E33 (full).jpeg (223KB - 77 downloads)
467FB13F-FCAB-47DE-A76B-FA204F686209 (full).jpeg (171KB - 82 downloads)
| |
|
Dickey John seed tube module pin out help
