|
WC MN | Glad you shared. As I have a couple A and C models.
I’ve heard repeatedly over the years of how they have it fixed, and this was well before the E model introduced.
AGCO territory man should be notified. I wouldn’t worry about metal flakes. And they probably will tell you to run it. But at least you will have documentation IF one goes out.
We swap out reaction arm bearings when oil leaks out the hub. So take camera, snap pic on bottom in between the drive wheels.
We change RArm oil after spring work and after fall work. No matter the hours. It’s about $100 a year per machine to do both.
Here is a pic of one of ours last week.. notice the yellow hint of paint , that tells me that arm has been done once. And we had some pp acres, wheat still in there. If this area was wet, we’d rip it apart and have it rebuilt... Ziegler usually has a rebuilt ready to go assembly on inventory ready to go, so ya just swap me out to save time.
Overall, our mt’s have been very cheap per hour ran. When Ziegler gets a rebuild program on these machines like they do with dozers and Payloader’s, I’ll probably be a customer to have it done.
Edited by Newguy 1/18/2020 09:14
 (268C1880-CD06-40BC-9C71-52CB45788C29 (full).jpeg)
Attachments
----------------
 268C1880-CD06-40BC-9C71-52CB45788C29 (full).jpeg (99KB - 57 downloads)
| |
|
Mt775E reaction arm bearing
