|
| the linkage doesnt go straight from the cab to the tranny. there are bell cranks at the top of the right hand frame just ahead of the axle. can be seen by looking through the wheel. dirt etc. likes to collect there, especially if wheels are set narrow. get in there with a blow gun or pressure washer and clean that area out. after cleaning, get out the can of lube and start spraying. keep working the linkage and lubing. in extreme cases you can move the wheel out if needed to get more room to work. after you get it working better, periodically clean with blow gun and relube. | |
|
7600 powerquad problems
