|
NE WI | I just drew this up in TinkerCad. If you have a 3D printer or access to one can print a few and mark the setting on them. Starts at 1/8" increments and up to 7/8" in 1/16" increments. Each step is 5/8" long and is 1/8" thick.
No logo on it but you can print in your favorite combine color.
Download the STL here:
https://www.thingiverse.com/thing:3910884
 (sieve tool (full).jpg)
Attachments
----------------
 sieve tool (full).jpg (17KB - 8 downloads)
| |
|
Sieve setting tool
