|
SA | hard to find for me as well, so I emailed support@trimble, and they answered. I didn't have time to try it yet, but let's stay in touch, see how it goes.
Trimble said:
We recently provided a solution to your Support Case: 00964190. Please review the following solution. If you are satisfied that the solution has solved your issue, no further action is required from you.
If the solution does not solve your problem, please reply to this email and we will continue to troubleshoot this issue.
Subject: NAV 900 pinout
Solution: NMEA out from a GFX/Nav-900 you will need Cable connections – NMEA out of Nav-900
NAV-900 Guidance cables p/n 110549 and 110550 each have a NMEA out connection. It is a 6-pin
Deutsch connector. Pin 3 is TX2 / NMEA out and Pin 5 is Signal Ground.
Cable p/n 113633 was created for use with Trimble radios. It can be used to get NMEA out of the NAV900 to a DB9 connector. The connector has female connector with pins. It ships with a Null Modem
adaptor. The adaptor is meant to be used with the radio.
When using cable p/n 113633 a Gender Changer adaptor is req | |
|
GFX750 - NAV900 pinout
