Gresham, Nebraska | Blew a major hydraulic hose on a wheel motor and this wrap was around 7 hoses......bugger to take off and the kinked up wad in the picture is what I ended up with. Mug is for size comparison - this is really stiff stuff. I've got it straightened out now and would sure appreciate any tips/tricks to handling this spiral wrap and not get so frustrated getting it back on......and no, it's not in an easily accessed area. Thanks for any help/ideas!
Edited by Savage 7/16/2019 07:33
 (Hydraulic Hose Wrap (full).JPG)
Attachments
----------------
 Hydraulic Hose Wrap (full).JPG (209KB - 35 downloads)
|
There's gotta be a trick to handling spiral hose wrap......
